KIA Hyundai Steering Lock Emulator Simulator Smart Keyless Systems Plug & Play

KIA Hyundai Steering Lock Emulator Simulator Smart Keyless Systems Plug & Play:

KIA Hyundai Steering Lock Emulator Simulator works for most KIA & Hyundai models with keyless-go systems. Just Plug and Play No Programming Required

Hyundai ESCL plug & play emulator troubleshooting:

• Hyundai ESCL emulator is not powered permanently, both GND and +12v are switched on by PDM for short time to allow LOCK / UNLOCK actions.
• Kia ESCL emulator operation is managed by IPM which communicates through serial comm line and additionally allows ESCL operation by pulling the ESL ENABLE pin to +12v.
• Both ESCL outputs (serial comm. line and ESCL UNLOCK are open collector outputs without pullups on board.
• HYN ESCL emulator unlock goes low if ESCL is unlocked.
• LED on HYN ESL emulator board blinks if any action is performed (request for lock / unlock received or ESCL is powered on).

How To Install The KIA Hyundai Steering Lock Emulator Simulator:

• Unplug The ELV Wire From The First Car Steering Lock Unit.
• If Vehicle Steering Lock Is In Lock Mode, Steering Lock Must Be Faraway From The Car
• Connect Our KIA / Hyundai ELV Emulator To The Car And Begin The Car.

Vehicles compatible with this KIA Hyundai Steering Lock Emulator:

I30, IX35, Kona, Picanto, Rio, Sorento, Sportage, Tucson, Xceed, Ceed, Cerato, Elentra, I10, I20, Forte, Optima, Santa fe, Cadenza