Scorpio-LK Tango SLK-07E SLK-07 Emulator for Toyota & Lexus 128bit DST AES Smart Keys [Page1 AA]:
-
The SLK-07E is an emulator device produced by Scorpio‑LK (for use with the Tango key-programming system) designed for 128-bit “smart-key” systems in Toyota and Lexus vehicles.
-
It supports cloning existing “smart keys” (transponders / key-fobs) with “Page 1 AA” / “DST-AES Page1 AA” encryption — the type used in many modern Toyota / Lexus smart-key systems (often called RF430 / AES-type smart keys).
-
As an emulator it can store key-data (once written) and act in place of the original smart key — useful during cloning or programming tasks.
Tango SLK-07E serves two purposes:
- Cloning existing Toyota/Lexus 128bit smart Keys with Page 1 AA
- Allows addition of used (reset) or otherwise unauthorized Toyota/Lexus 128bit smart Keys with Page 1 AA to be added to vehicle through SLK-07 utility function.
Typical Workflow / Use-Case for SLK-07E
-
Insert the original (working) smart key into the Tango coil and “Read”.
-
“Decode Transponder” via the Tango software.
-
Remove the original key, place a battery-powered SLK-07E emulator on the coil.
-
Press “Write” — this writes the key data into the SLK-07E emulator.
-
(Optional / if creating a spare): Use online diagnostic tool (e.g. Toyota Techstream) to teach a blank smart key to the vehicle. Then using emulator + programmer to finalize the key cloning.
NOTE: Emulator requires a small battery (e.g. CR1616 / CR1620 / CR1632—depending on version) to retain programmed data and operate.
System requirements for cloning:
-
SLK-07E emulator
-
Toyota maker
-
SLK-07 maker
System requirements for SLK-07 Utility:
-
Tango programmer
-
SLK-07E emulator
-
Toyota maker
-
SLK-07 maker
-
Toyota Techstream online service (3rd-party service)
-
Internet connection
Tango SLK-07E Emulator Guide and USER Manual:
Scorpio-LK Tango Key Programmer SLK Emulator:
Reviews
There are no reviews yet.