Bestool BST-900M-T-K SOLDERING TIP GOLD

Bestool BST-900M-T-K SOLDERING TIP GOLD:

Manufacturer: BESTOOL
Model: BST-900M-T-K
Size: 40 mm

Bestool BST-900M-T-K SOLDERING TIP GOLD For BST-102C SOLDERING IRON & BST-898D 2 in 1 LED Display Hot Air Gun BGA Rework Station

Iron tip maintain:

First, the tip of the maintenance:

Appropriate use of the tip and often pay attention to the maintenance and maintenance of the tip, can greatly increase the life of the tip. Before welding work: you must first clean the sponge wet water, and then squeeze the excess water, so that the solder can be a good cleaning effect, if the use of non-wet cleaning sponge, will damage the tip and lead to tin The

Second, the order of welding can make the solder to get the protection of solder and reduce the oxidation rate:

1, before welding, first clean the tin on the tin;

2, for welding;

3, no need to clean, and the welding iron back to the iron frame;

4, Note: Do not use sandpaper or hard objects to dean the tip.

Third, after welding work

First tum the tip temperature to 250 °C, and then clean the solder Tsui, plus a layer of new tin for protection. (If the use of non – controlled temperature welding iron, then the first power cut off, so that the tip temperature slightly lower after the tin.

Fourth, the welding Tsui oxidation treatment First tum the tip temperature to about 250°C, and then clean the sponge clean the nozzle, and then on the tin, continue to repeat the action until the oxide clean up so far.

5, other precautions Try to use low-temperature welding, if the tip temperature exceeds 470 °C, its oxidation rate is 380 °C twice.