433MHz Multi-function Automatic Copy Remote Control 4-Channel

433MHz Multi-function Automatic Copy Remote Control 4-Channel Features:

• Manufacturer: Aftermarket
• Frequency range: 433MHz
• Wireless transmission distance: 50-100m
• Working voltage: DC3V (a built-in 2032 battery)
• Working current: 10mA@3V
• Radiation power: 10mW@3V
• Encoder type: fixed code, learning code, partial rolling code
• Mainly used for remote control of some cars. Remote control electric retractable doors, lifts, remote control barriers, remote control rolling doors, garage doors, sliding doors, remote control LED lights, remote control fireworks igniters, remote control passenger car doors, anti-theft alarms, electric Door alarm, MP3 motorcycle anti-theft alarm, etc.
• Copyable chips: 2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (all manufacturers), 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HT6026 , HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT6P20D, 12L-4SC, PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211

Cloning Method:

1. Code clearing method:

Press the unlock button and the lock button at the same time, after the LED indicator light flashes three times (some shells are the up button and the down button), loosen any of the buttons while the other continues to press, then push the released button three times, the LED indicator enters the fast flashing state . Currently all memory data is cleared, cleared remote control will not have illumination LED indicator no matter which button you press.

2. Copy method:

One hand holding the original remote, the other holding the copy remote, the two remotes should be placed as close as possible (the ideal situation is to put the two remotes side by side on the desktop with zero distance), press the copy button respectively, after the LED indicator light three flashes flashing quickly, this copy is successful, other key operation methods are the same. Some remote control has a smaller transmit power, so the original remote control must be placed back in the copy remote control to be operated. For the presence of noise, if the copy is not successful, it should be retracted after clearing the code.