Xhorse Smart Key Box XDSKE0EN Work with Smart Phone

Xhorse Smart Key Box XDSKE0EN Work with Smart Phone:

XHORSE SMART KEY BOX is a newly designed tool by Xhorse, aiming to help users achieve a non-remote driving experience. By installing the tool into your car, your smartphone is able to work as an independent car key. Usually, it inherits all of the functions of your original remote, including lock, unlock, panic and trunk. Furthermore, keyless entry is also a function that can be performed on your smartphone..

The Xhorse Smart Key Box is an adapter that can be used to access a vehicle using a mobile phone app via Bluetooth connection. In other words, with this adapter, you can add Bluetooth Connectivity to the Central Locking System / Keyless Entry System of any vehicle that you can configure an Xhorse Universal Remote to operate. This adapter will allow wireless (via Bluetooth) locking, unlocking, and remote start. Keep in mind that this adapter does not add any of these features to the vehicle. In order for this adapter to wirelessly lock, unlock, or remotely start the vehicle, these features have to already be functioning in the vehicle before the Xhorse Smart Key Box is installed.

Xhorse Smart Key Box USER Manual PDF:

Xhorse Smart Key Box XDSKE0EN User Manual PDF

Xhorse Smart Key Box Features:

1. Developed and produced for the aftermarket. It adopts advanced RF technology and is suitable for the car with push start function.
2. Support add smart key for car
3. Support add or modify the keyless-enter function
4. The product with simple installation and reliable performance.
5. Use VVDI Device to generate remote control. Support device: MINI Key Tool, Key Tool Max, Key tool Plus, VVDI2

How to Install and Use Xhorse Smart Key Box?

1. Take out the original remote control, solder the cable according to the soldering diagram of the original remote control, pay attention to the direction.
2. Connect the RF antenna, LF antenna (connect any two interfaces of Lf antenna), and the original remote control to be transferred.
3. Find the Vbat wire and ground wire from fuse box, OBD interface or other locations.
4. Find the ACC signal line( the original car radio, the line with electricity after the navigation power on or the instrument light on).
5. Connect the Vbat wire, ground wire and ACC wire of the power supply cable to the car.
6. Setting DIP switch
7. Bindings of remote control and mobile phone (refer to binding instruction
8. Install complete
9. After installed, take a key close to the car, test the automatic unlock and lock function if you stay away (test other keys in the same way
10. Test unlock, lock, trunk and car panic function after connecting with APP

The installation process in a glance:

• Solder Supplied Wires To The PCB Of An Xhorse Universal Remote
• Program This Remote To The Vehicle
• Connect The Smart Key Box To The Vehicle Through The OBD2 Connector

The safety index is higher than the original remote control.
You can perform “Security Settings” on the “Smart Key BOX” APP.
Even if the phone is lost, others cannot open your car.
You can “turn on verification” in the security settings.
Four security verification methods, easy to operate, prevent problems before they happen.

Xhorse Smart Key Box Parameters:

• Size: 100mm*78mm*20mm
• Operating Voltage: 8V-12V
• Quiescent Current: 9mA(12V)

Maintenance:

• Do not violently hit, shake or throw the host.
• Do not directly rinse the host and components with water or other liquids, and do not wipe the machine with a damp cloth.
• Do not place the host in high temperature, high humidity or dusty environment.
• Do not disassemble or modify the device privately, otherwise it may cause accidents such as damage to the main board or fire.
• Please protect the key components to prevent sharp objects from damaging them.

Xhorse Smart Key Box Package List:

• 1pc*Machine
• 1pc*LF antenna
• 1pc*RF antenna
• 1pc*Power supply cable
• User manual
• Product quality certificate