Xhorse VVDI BE Key Pro For Mercedes Benz Yellow Color 315/433MHz XNBZT1GL

Xhorse VVDI BE Key Pro For Mercedes Benz Improved Version Yellow Board No Points 315Mhz/433Mhz XNBZT1GL:

New Released Xhorse VVDI BE Key Pro can Programmed by all kinds of MB key programmer
Yellow Color No Bonus Points
Frequency changeable 315Mhz/433MHz
Reusable – you can reset it
Model: XNBZT1GL

VVDI MB BE Key Yellow Board vs Green Board:

The yellow board does not contain 200 bonus points, but cheaper than the XNBZ01EN green board
Work the same, only color difference.

Xhorse VVDI BE Key Pro For Mercedes Benz Yellow Color XNBZT1GL Features:

• Frequency changeable 315Mhz/433MHz
• Reusable – you can reset it
• Programmed by all kinds of MB key programmer, such as Autel IM608, CGDI MB, VVDI MB, Key Tool Plus, Digimaster-III ,CKM100, AK500, MBE MB-KEY OBD2, NEC-57 MB-PRO and so on
• Can use Mercedes smart key 3 button or 2 button key and it worked lock/unlock/ trunk.
• Xhorse brand, superior quality.
• Applicable chip models:705 Moto(1997-2000) NEC(2001-2005) NEC(2006-2010) BGA(after 2011)
• More compatibility
• New design
• High Stability
• High reliability
• Digital Signature
• High quality with a reasonable price
• No points will be accumulated

How to Change Benz VVDI BE Key Pro Yellow Color Frequency?

The ways to reset the frequency:

1) with the PCB SMD resistor. Weld the 1K SMD resistor on the position the arrow points and the frequency is 315MHZ, after remove it will be 433.92MHZ.
2) Change frequency between 315MHz and 433MHz with VVDI MB Tool.

VVDI BE Key Pro Yellow Color XNBZT1GL Supported remote shells:

• Mercedes Benz BE Smart Remote Key Shell 3 Button – GS-MER-015
• Mercedes Benz BE Smart Remote Key Shell Cover 4 Button IYZ-3312 – GS-MER-016

VVDI BE Key Pro XNBZT1GL Improvements:

1. Fix the bug that W164/W639 EIS data doesn’t synchronize the key.
2. Fix the bug that the BE key fails to turn on the ignition after repeat try.
3. Fix the bug of trunk remote open
4. Fix the bug that the BE key only sent RF signal for one time, after update, the RF signal can be sent for two times when press and release the key.
5. Modify the rolling algorithm, fix some errors of BE key.
6. Add pre-roll algorithm: the HASH value can roll ahead.
7. Adopt car-grade quartz crystal, improve infrared communication stability.
8. Boost the infrared signal when you press the button.
9. Support resetting the key frequency between 315MHZ and 433.92 in the way of VVDI MB tool or the PCB SMD resistor
   Note: VVDI MB tool has priority over the SMD resistor, which means if you reset the key frequency with VVDI MB tool at first, the SMD resistor won’t work, and you need to use the VVDI MB tool to erase the frequency then use the SMD resistor.