Lonsdor KH100+ Remote Key Programmer Handheld Device

Lonsdor KH100+ Remote Key Programmer Handheld Device Update Version of KH100:

Lonsdor KH100+ Remote Key Programmer User Manual:

Lonsdor KH100+ Remote Key Programmer USER Manual

Lonsdor KH100+ Remote Key Programmer Highlights:

1. Modern appearance design, in line with the operating habits of the public.
2. Device system comes with operation instructions, easier for you to use.
3. It covers almost all the functions of the similar products in the market.
4. Built-in super sensor to collect data(over-range data collection).
5. Exclusive support for 8A (H chip) generation.
6. Built-in WIFI module, can connect to network at any time
7. 4-pack remotes & smart key involved
8. Handy chip holder integrated, 902MHz supported
9. Toyota 8A Smart Key Direct copy to Add key (Latest Update)
10. With Extra Toyota AKL License, KH100+ will be able to work on Latest Toyota & Lexus All Key Lost and Add Key.

Lonsdor KH100+ Remote Key Programmer Vehicle CAR List:

Lonsdor KH100+ General Remote Generation Car List

Lonsdor KH100+ Smart Remote Generation Car List

———America———

JEEP
Cherokee ID4A 433.9MHz

BUICK
GL8 2009-2012 ID46 315MHz
LaCrosse 2009-2012 ID46 315MHz
Regal 2009-2012 ID46 315MHz

DODGE
Dodge ID46 433.9MHz
Journey ID46 433.9MHz

CADILLAC
<4>SRX -15 ID46 315MHz
ATS -2015 ID46 315MHz
XTS -2015 ID46 315MHz

CHEVROLET
Cruze 2009-2012 ID46 315MHz
Malibu 2009-2012 ID46 315MHz

———EUROPE———

MASERATI
Maserati ID46 433.9MHz

———ASIA———

NISSAN
Teana 2009-2013 ID46 315MHz
X-Trail 2014- ID4A 433MHz
Sunny 2010- ID46 315MHz
Tiida 2010- ID46 315MHz
Sentra 2010- ID46 315MHz
March 2010- ID46 315MHz
Bluebird 2017 ID46 433MHz
Sentra 2017 ID46 433.9MHz
Murano ID4A 433.9MHz
Teana 2014-2015 ID47 433MHz
Teana 2016-2017 ID4A 433MHz

KIA
Sorento 2014-2015 ID46 433MHz
K5 2014-2015 ID46 433MHz
Forte 2007-2012 ID46 433MHz

MITSUBISHI
ASX ID46 434Mhz
Outlander ID46 434Mhz
Escape ID46 434Mhz

HYUNDAI
Sonata 8 2007-2012 ID46 433MHz
Sonata (NFC) 2007-2012 ID46 433MHz
SantaFe 2007-2012 ID46 433MHz
Sportage R 2007-2012 ID46 433MHz

INFINITI
QX50 ID46 315MHz
QX60 ID46 315MHz
Q70 ID46 315MHz
Q50 ID4A 433MHz
Q50L ID4A 433MHz

——–CHINA———

BAOJUN
BaoJun 560 ID46 433.92Mhz
BaoJun 730 ID46 433.92Mhz
BaoJun 510 ID46 433.92Mhz
BaoJun 530 ID46 433.92Mhz

BAIC
Saab D50
Saab X25
Saab X65
Saab D60
Saab D70
Saab X55
Weiwang M50F
Weiwang M60
Saab BJ20

BYD
F0 2011- ID46 315MHz
F3 2011- ID46 315MHz
F5 2011- ID46 315MHz
G3 2011- ID46 315MHz
G5 2011- ID46 315MHz
G6 2011- ID46 315MHz
L3 2011- ID46 315MHz
S6 2011- ID46 315MHz
Surui 2011- ID46 315MHz
Sirui 2011- ID46 315MHz
Tang 2011- ID46 315Mhz
Song 2011- ID46 315Mhz
Yuan 2011- ID46 315Mhz
Qin 2011- ID46 315Mhz

P_C_DS
Peugeot ID46 433MHz
Citroen ID46 433MHz
DS ID46 433MHz
Peugeot ID4A 433MHz
Citroen ID4A 433MHz
DS ID4A 433MHz
SOUTHEAST
DX7-A(old) ID46 433.9MHz
DX3 ID46 433.9MHz
DX7-B(new) ID46 433.9MHz

GEELY
Emgrand EC7 ID46 433MHz
Geely-GC9 ID46 433MHz
Emgrand EC8 ID46 433MHz
BoYue ID4A 433.92Mhz

GUANGQI
GS3 ID47 433Mhz

ROEWE
MG ID47 433MHz
RX5 ID47 433MHz

GREATWALL
H6(new) -2017 ID46 433.9MHz
H2(new) -2017 ID46 433.9MHz
H6(Old) ID46 433.92Mhz

ZOTYE
Domy X7 ID47 433.92Mhz
SR7 ID47 433.92Mhz
SR9 ID47 433.92Mhz
CS10 ID47 433.92Mhz
Z700 ID47 433.92Mhz

Lonsdor KH100+ Remote Key Programmer Function List:

• Identify/Copy/Generate Chip:

Multi-vendor chips supported
Especially Toyota 8A(H) chip Our predominance

• Chip Simulation:

Able to simulate 4D/46/48 chips
With built-in super sensory data collector (no interference within 1 meter when collecting data)

• Remote Generation:

Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to generate remote control according to different regions.

• Remote Frequency

Enter menu, put remote control at the device’s induction area to detect remote frequency.

• Smart Key Generation:

Enter [Generate key]->[Generate smart key] menu, choose the corresponding vehicle type to generate smart key/card according to different regions.

• Access Control Key

Enter menu, you can identify and copy IC card, and generate garage key as well

• Chip Generation

Put below types of chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts.
This device supports below chip types: ①4D ②46 ③48 ④T5 ⑤7935 ⑥8A ⑦4C ⑧Chip conversion

• Coil Identification

1- Search smart induction area Connect remote key with remote connector, Put KH100+’s antenna close to the pre-determined position. If inductive signal is identified, the device will continuously make sounds, please check if the position is right(as shown below).
2- Detect IMMO Connect remote key with remote connector, Put KH100+’s antenna close to key identification coil, and use key to turn ignition ON. When KH100+ buzzer beeps, it means signal is detected.

Lonsdor KH100+ Special Function:

Include: detect infrared signal, unlock Toyota smart key, More functions, to be continued…

1. Detect Infrared Signal:

Put remote control at the infrared signal detection area, press the remote’s button once. When the light on KH100’s screen is on, it indicates there is infrared signal, otherwise there is no signal (see below pic).

2. FT Smart Key:

For Toyota or Lexus smart keys from Lonsdor, you can perform the following functional operations: read version info, modify key value, unlock and upgrade program and etc. Put in the smart key, click [select] to operate.

3. Unlock Toyota Smart Key/Detect Toyota Key Status:

Put in the smart key, click OK to operate.

4. Charge Key:

For a chargeable key with battery, you can perform this function. Put in the key, click [OK] to operate.

Lonsdor KH100+ Registration Guide:

Note: After booting the device, please connect to WIFI and enter the following process.

For New user:

• For the first use, please prepare a common call phone or email to help complete activation process, click OK to start.
• Boot the device and enter registration activation process.
• Input user name, password. Confirm password, cellphone number or email to obtain verification code. Then input the code to submit registration.
• Account registered successfully, it will take 5 seconds to bind the device.
• Successful registration, enter the system.

For Registered user (who has registered Lonsdor products before):

• For the first use, please prepare a registered call phone or email to help complete activation process, click OK to start.
• Boot the device and enter registration activation process.
• Input your registered mobile number or email, password to obtain verification code. Then input the code to submit login.
• Account login succeeded, it will take 5 seconds to bind the device.
• Successful registration, enter the system.

In addition, users who have already registered Lonsdor’s product can directly choose [registered user] to activate account.

Lonsdor KH100+ Update:

• Enter settings menu
• Connect the device to network
• Then choose [check for updates]
• One-click for online update!

Lonsdor KH100+ Device components:

Lonsdor KH100+ Remote Key Programmer Specifications:

• Size: 193mm*88mm*24mm
• Screen size: 2.8 inch color screen
• Resolution: 320*240
• Battery: 3.7V 2000mA/H
• Power: 5V 500MA
• Work Temperature: -5~60℃
• USB: USB-B/Charge-Data Transfer
• Connector Port: PS2-7Pin OD3.5 7Pin,1.27 Spacing,The 2ND Pin:NC