H&H Remote Control Frequency / IR / LF Coil Tester 312MHz~902MHz

H&H Remote Control Frequency / IR / LF Coil Tester 312MHz~902MHz features:

Product Description:

• Power Indicator

When the instrument is turned on and enters the running state, the Power indicator lights up and enters

the constant light state, and the indicator goes off after the power is turned off.

• Car Remote Frequency Indicator

For testing the common frequency of car remote control, when the instrument detects a certain

frequency, the indicator light corresponding to the frequency will light up and flash and emit a beeping sound.

• IR Infrared Frequency Indicator

Can test the carrier 38KHz infrared frequency, when the instrument receives the signal of the frequency, then the indicator lights up and flashes.

• LF Indicator

Can test IMMO / PKE low frequency coil transmitting frequency 22KHz / 125KHz / 134.2KHz. When the instrument receives these frequencies the indicator lights up and blinks.

• OEM Indicator

Can distinguish whether it is the original remote control, used to test Toyota smart card..

• Power

Turn on and off the detector.

Product Highlights:

• CAR REMOTE CONTROL FREQUENCY TEST

Short press the power button to turn on the instrument, the power indicator lights up, the OEM indicator is off

Place the remote control close to the detector and press any of the buttons on the remote control

The corresponding frequency signal light on the detector will flash and beep, indicating successful detection

• IR INFRARED FREQUENCY TEST

Short press the power button to turn on the instrument, the power indicator lights up, the OEM indicator is off

Place the remote control close to the detector and press any of the buttons on the remote control

The corresponding IR frequency signal light on the detector will light up, the corresponding frequency signal light flashes and beeps

• OEM ORIGINAL REMOTE CONTROL

Short press the power button to turn on the instrument, the power indicator lights up, short press the power button again, the OEM indicator lights up and enters the constant light state

Bring the original remote control close to the detector

The corresponding OEM signal light on the detector will flash and beep, indicating successful detection

• LF LOW FREQUENCY COIL TEST

Short press the power button to turn on the instrument, the power indicator lights up, the OEM indicator is off

Put the tester close to the car ignition lock and twist the key to ignite the car

The corresponding LF coil signal light on the detector will flash and beep, indicating successful detection, and if there is no response, it indicates a fault in the ignition lock coil