Bestool BST-1515A Desoldering Wire Solder Remover Wire

Bestool BST-1515A Desoldering Wire Solder Remover Wire 1.50*1.50mm Features:

Manufacturer: BESTOOL
Model Number: BST-1515A
Length: 1.50m
Width: 1.5mm
Application: desolder
Material: Alloy copper wire
Melting Point: 0

How to Use Desoldering Wire (Bestool BST-1515A):

1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove the desoldering wick after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.
4. Repeat steps 1 2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63 Percent and 60 Percent (tin content) have good absorbability.

Bestool BST-1515A Desoldering Wire Solder Remover Wire Features:

1. High quality alloy copper wire from the precision weaving.
2. For the removal of tin in the excess solder, resistance to oxidation and corrosion.
3. Thermal conductivity, tin effect is very good, tin suction clean, Low residue.
4. Suitable for precision circuit using.

Bestool Desoldering Wire Solder Remover Wires: