2009-2017 Audi A4 (B8) A5 Q5 Body Control Module BCM 8K0 907 064

2009-2017 Audi A4 (B8) A5 Q5 Body Control Module BCM 8K0 907 064 8K0907064 (OEM):

Manufacturer: Genuine-Parts
OEM Part Number: 8K0 907 064, 8K0907064
FCC ID: NBGBCM2
IC: 2694A-BCM2
CMII ID: 200DJ4039
Condition: USED

Audi A4 (B8) A5 Q5 Body Control Module BCM 8K0 907 064 Compatibility:

• 2009 – 2016 Audi A4 (B8)
• 2009 – 2017 Audi A5
• 2009 – 2017 Audi Q5

Installing the BCM (8K0 907 064) in an Audi A4:

Tools Needed:

• Torx screwdriver set
• Trim removal tools
• OBD-II scanner (for coding)
• Multimeter (optional)

Installation Steps:

1. *Preparation*:
– Disconnect the negative terminal of the battery to avoid any electrical short circuits.
– Ensure you have the new BCM ready for installation.

2. *Accessing the BCM*:
– Remove the lower dashboard cover or panel where the BCM is located. This usually involves removing several screws with a Torx screwdriver.
– Use trim removal tools to gently pry off any clips without damaging the trim.

3. *Disconnecting the Old BCM*:
– Locate the existing BCM (typically found in the passenger footwell or behind the fuse panel).
– Disconnect the wiring harnesses from the old BCM by pressing the tabs and pulling them out carefully.

4. *Removing the Old BCM*:
– Unscrew the BCM from its mounting bracket.
– Carefully remove it from the housing.

5. *Installing the New BCM*:
– Position the new BCM in place and secure it with screws.
– Reconnect all wiring harnesses, ensuring they are firmly attached.

6. *Reassembling the Dashboard*:
– Reinstall the lower dashboard cover or panel, securing it with screws and clips.

7. *Reconnecting the Battery*:
– Reconnect the negative terminal of the battery.

8. *Coding the BCM*:
– Use an OBD-II scanner to access the vehicle’s control modules.
– Follow the scanner’s instructions to code the new BCM to ensure compatibility with your vehicle’s systems.

9. *Testing*:
– Start the vehicle and check that all functions controlled by the BCM (lights, locks, etc.) are operating correctly.
– Perform a diagnostic check to ensure there are no error codes related to the BCM.

Notes:

• If you encounter any issues, double-check all connections and ensure the BCM is properly coded.
• It may be beneficial to consult the vehicle’s service manual for specific details related to your model year.