2021-2023 Original Toyota Tundra Sequoia Smart Key 3 Buttons 315MHz HYQ14FBB 89904-0C050 89904-35060

2021-2023 Original Toyota Tundra Sequoia Smart Key Remote 3 Buttons 315MHz 8A Chip 0010 Board FCC ID HYQ14FBB 89904-0C050 89904-35060:

Manufacturer: Toyota / Original with normal bag
OEM Part Number: 89904-0C050, 899040C050
Compatible Part Number: 89904-35060, 8990435060
FCC ID: Denso HYQ14FBB
IC: 1551A-14FBB
Board: 0010
Frequency: 315MHz
Transponder Chip: 8A
Keyless Go: Yes
Buttons: 3 / Lock, Unlock, Panic
Toyota Tundra smart key battery replacement: CR2032
Emergency insert key blade same as 9515-33100 – TOY48 / NOT Included
Toyota Tundra Sequoia Smart Key Remote 3 Button 315MHz HYQ14FBB Compatibility:

• 2021 – 2023 Toyota Tundra
• 2021 – 2023 Toyota Sequoia

Accessories: Sold Separately:

• Silicone Cover: GS-SIL-015

Note: The 2021-2023 Toyota Tundra Sequoia smart key remote with part number: 89904-0C050 / 89904-35060 must first be programmed before it will start the car, therefore you must go to your local dealer or a car locksmith to get it done. An emergency insert key must also be made.

How to Change a Toyota Tundra’s Key Fob Battery:

It could be time to replace the battery if your Toyota Tundra key fob isn’t functioning correctly. To change the battery in your Toyota Tundra key fob, simply follow these simple steps.

What You’ll Need: A tiny flathead screwdriver and a fresh CR2032 coin battery

Step-by-Step Guide:

1. Open the Key Fob

   • Locate the small notch on the side of the key fob.
   • Use a flathead screwdriver to carefully pry the key fob apart.

2. Remove the Old Battery

   • Inside, you’ll find the old CR2032 battery.
   • Use the screwdriver to gently lift it out.

3. Insert the New Battery

   • Place the new CR2032 battery into the slot with the positive (+) side facing up.
   • Ensure it is securely in place.

4. Reassemble the Key Fob

   • Align both halves of the key fob and snap them together.

5. Test the Key Fob

   • Press the buttons to ensure the fob is working properly.